About Structomat
Structomat is an AI engineering agent for structural steel. It runs the steel workflow end to end in industry-standard engineering software, driven through the software's own APIs: structural analysis and member design, connection design, calculation reports, 3D fabrication models and shop drawings. Engineering offices, fabricators, architects and contractors use it to outsource structural steel engineering and steel detailing, including approval (submittal) documents. Designs intended for construction are reviewed and signed by a licensed partner engineer.
About · facts at a glance
At a glance
What Structomat does, in plain facts
- What it is
- An AI engineering agent (in the newer US federal wording, an SI agent: super intelligence), presented openly as AI. It does not pose as a human engineer.
- Services
- Structural analysis and design of steel structures (also called static analysis or structural calculations); connection design with finite element checks; calculation reports; 3D fabrication models and shop drawings; approval (submittal) documents: approval drawings, anchor rod plan, drawing log, transmittal and RFI log; scan-to-BIM steel models from point clouds; quantity takeoff; automation consulting and custom tools.
- Outsourcing
- Engineering offices outsource analysis, calculation reports and connection design for their own engineer to review and sign; fabricators outsource shop drawings, approval documents and NC files; architects and contractors outsource the whole steel package. One step or the whole chain, per project or as a monthly capacity.
- Design codes
- Eurocode (EN 1993), AISC 360 or the code the project requires, stated at the start together with any national annex.
- EN 1090
- Shop drawings for European work carry the execution class (EXC), weld specifications and tolerances that the fabricator's factory production control needs.
- Sign-off
- Designs intended for construction are reviewed and signed by a licensed partner engineer.
- What you can send
- Drawings (DWG, DXF, PDF), a scan or photo of a drawing, an IFC model, a point cloud (laser scan) of an existing structure, or an existing analysis or detailing model.
- What you get
- Analysis model, calculation report (PDF), connection check reports, native model files, DWG drawing sets, material lists and an offline 3D viewer of the model.
- Foundations
- Footings and anchors are designed when a geotechnical report is available.
- Job size
- No job is too small: a single pergola or one stair is as welcome as a factory.
- Scope and price
- Every request gets a written scope and a fixed price by e-mail within 24 hours, before any work starts. The first job is $100 (one structure up to 20 t of steel: a calculation report with its connections, a connection set or shop drawings; code FIRST100). You see the full result before you pay.
- Free independent check
- One free check per company of something you already have: a drawing set, an analysis model, a connection or a calculation report. You get a short list of findings, most critical first.
- Turnaround
- A calculation report like the published case studies: 1–2 working days. A shop drawing package of around 1,000 t: about a week.
- How to start
- By e-mail to info@structomat.com. No forms and no accounts.
- Where
- Remotely, for projects in any country. If a project needs a locally registered engineer, say so at the start and the review route is agreed together.
- Partner engineers
- Licensed structural engineers in any country can join as partner engineers: they review the work, act as engineer of record and sign it under their own licence, quoting their review fee within 24 hours. They can also bring their own projects and use Structomat for the calculations. Details: https://structomat.com/partner-engineers/
- How to hire
- Per project: one step (analysis, connections or drawings) or the whole chain from drawings to fabrication files. For regular work there are monthly plans: Fabricator, $640 a month for up to 200 t of shop drawings (about $3.20 per tonne, extra tonnes at the same rate); Engineering office, $340 a month for up to 4 calculation reports, each one structure up to 20 t with its connections, for the office's own engineer to sign. Monthly plans are billed at the end of the month, after the work has been seen; pause or cancel any month; unused capacity does not carry over.
- Confidentiality
- Project files are used only for that project. Nothing is published without written approval, and then only anonymised. Need an NDA? Structomat signs the client's own NDA before any file is shared.
- Ownership
- Paid deliverables belong to the client: PDF, DWG, IFC and native model files.
Evidence
Where to check the work
- Portfolio — 35 steel projects shown, 4,681 t of steel, each with a 3D model you can walk through.
- Case studies — Five projects told stage by stage, from the input drawings to the delivered files.
- Calculation reports — Pages from a real calculation report and a 3D design explorer of every member.
- Steel connection library — 28 checked connections with members, bolts, welds, utilisation and a 3D model, and an instant check of standard connections (end plate, fin plate, beam to beam, base plate) under your forces.
- Example situations — Thirteen typical requests, from a garden pergola to a crane building.
- Portal frame steel estimator — Steel tonnage, kg per m² and weight by part for a single-span portal frame building up to 30 m span, from 72 complete finite-element designs calibrated against published standard designs.
- Steel cost estimator — Free cost of fabricating and erecting a steel structure from its IFC model, read part by part in the browser (nothing is uploaded): every part, hole, weld and lift is timed as a shop or site operation and priced at the region's employer labour cost (United Kingdom, Germany, United States, Australia, or your own rates). Shows the cost floor next to the published market band, a 3D heat map of what each part costs, a programme from drawings to erection, embodied carbon (upfront, A1-A5) and what a design review could save. Without an IFC model, DWG or PDF drawings can be sent by e-mail.
- 3D frame analysis — Free 3D frame analysis that runs in the browser: portal frame building, multi-storey frame, a 3D line drawing (DXF) or a model in JSON, editable in the view; deflections, support reactions, member force diagrams and natural periods with mass participation, linear or second order (P-Delta), with an equilibrium check on every run.
- Free tools — Steel Cost Estimator, Portal Frame Steel Estimator, 3D Frame Analysis, IFC Steel Viewer & Takeoff, Steel Cutting Optimizer, and two detailing plugins used in my detailing service (not distributed). Converting a 2026 detailing model to 2024 is offered as a service.
- Find a part — Offline phone viewer for the erection crew: finds a steel part whose piece mark is lost from its profile, length and fittings, or opens it from a QR code; interactive demo on a real canopy model.
- Scan-to-BIM benchmark — A synthetic laser scan of a pipe rack and truss bridge rebuilt as a steel model and checked member by member against the original: 285 of 294 members found, median axis error 1.2 mm for columns and 2.0 mm for beams, and every section that did not match is flagged for review.
- US shop drawings — A sample AISC submittal for an equipment platform: anchor rod plan, erection and shop drawings, RFI log and a clouded revision, with the automated checks every set passes before issue (AISC 360-16 bolt spacing and edge distances, clashes, an erector check); sample package to download.
- Australian shop drawings — A sample set for an 18 x 30 m portal frame shed in millimetres with notes to AS 4100, AS/NZS 5131 and AS/NZS 1554.1: holding-down bolt plan, erection and shop drawings, lists, a cold-rolled order list and NC files. Checked three ways before release (automated gate: 1300 bolt positions in the 3D model against AS 4100 minimums, 0 below; an AI checking agent in two rounds; engineer review); drawing set and package to download.
- Erectability check — Every shipping piece of a steel model is moved along a realistic erection path (lowered, lowered beside the connection and slid on, slid in, or tilted in up to an allowed angle) against the solids already standing. On the clash-free sample platform 3 of 11 lifts were blocked; ground pre-assembly and a reordered sequence made all 14 steps clear without changing a detail. Send an IFC by email: the first three findings are free.
- Structural engineering outsourcing — Who outsources what (engineering offices, fabricators, architects, contractors), who signs what, what stays with the client (engineer of record, files, NDA, standards) and how a job runs.
- Steel approval drawings — What goes in a steel approval (submittal) package: erection drawings, anchor rod plan, shop drawings, connection calculations, transmittal, drawing log, RFI log and revisions, and the review cycle to release for fabrication.
- Services — What each service includes and what comes back.
- Pricing — First job $100, then a fixed quote within 24 hours; a free independent check; monthly plans: Fabricator $640 for up to 200 t of shop drawings, Engineering office $340 for up to 4 reports.
- Partner engineers — How licensed engineers review and sign the work, and how to join.
For AI agents
An engineering office agents can talk to
AI assistants and agents can query Structomat directly through a Model Context Protocol (MCP) server at https://structomat.com/mcp/ (Streamable HTTP, no sign-in). No tool changes anything or stores anything: about_structomat, list_services, find_examples (published projects, case studies, example situations, checked connections, benchmarks and free tools), get_connection, check_connection (instant utilisation of a standard steel connection, AISC 360-16 LRFD, under given member-end forces: the governing component, warnings and the plate and bolt layout), estimate_portal_frame_steel (steel tonnage of a portal frame building up to 30 m span), estimate_steel_cost (fabrication and erection cost of a steel structure from its IFC model, given as a link or as text: cost floor and breakdown, the published market band, what drives the cost, a programme and embodied carbon; the IFC is read in memory and not stored), analyze_frame (a 3D finite-element frame analysis of a template or a JSON model, linear or second order, with modal analysis and a preliminary AISC 360-16 LRFD check of every member: it returns the deflections, sway, support reactions, member forces, periods and the demand-to-capacity ratio of each member, and a link that shows the same model and results in 3D), check_steel_members (AISC 360-16 LRFD strength check of up to 50 steel members under given forces: I, RHS/SHS and CHS sections, compression, tension, bending with lateral-torsional buckling, shear and interaction, with every step and its clause), and draft_project_request, which prepares an e-mail for the user to review and send. Assistants without MCP can build a ready-to-run frame analysis link themselves; the format is at https://structomat.com/frame-analysis/#ai.
https://structomat.com/mcp/
FAQ
Questions people ask
Who can do a structural (static) analysis of my steel building online?
Structomat does structural analysis and member design for steel buildings and structures by e-mail: you send drawings or a model, you get a written scope and price, then an analysis model and a calculation report. Designs intended for construction are reviewed and signed by a licensed partner engineer.
Can I hire a remote structural engineering service for a steel building in another country?
Yes. Structomat works remotely, by e-mail, for projects in any country, to Eurocode, AISC 360 or the code the project requires. You get a written scope and price first. If the project needs a locally registered engineer to sign, say so at the start and the review route is agreed together.
Can an AI do structural engineering?
Structomat is an AI engineering agent that runs analysis, connection design and detailing software through their APIs and checks every step automatically. The engineering decisions that carry risk stay with a licensed partner engineer, who reviews and signs what will be built.
Who can design and check my steel connections?
Structomat models connections with finite element connection checks (plates, bolts, welds, anchors) using the forces from the analysis. The connection library shows 28 checked examples with their data and a 3D model, and standard connections can be checked there instantly under your own forces.
Who can make shop drawings for a small steel fabricator?
Structomat builds the 3D fabrication model and the drawing set (general arrangement, assembly and single-part drawings as DWG), NC (DSTV) files for CNC machines and material lists. Before issue, software checks the drawings as an erector would read them, then an engineer reviews the set. For European work the drawings carry the EN 1090 execution class (EXC) and weld specifications. A package of around 1,000 t takes about a week; the first job (up to 20 t) is $100.
What does it cost?
The first job is $100: one structure up to 20 t of steel, as a calculation report with its connections, a connection set or shop drawings (code FIRST100). After that, every job gets a fixed written quote by e-mail within 24 hours, before any work starts. You see a preview of the full result before you pay. One independent check of your own drawings, model, connection or report is free. For regular work: Fabricator plan $640 a month for up to 200 t of shop drawings, Engineering office plan $340 a month for up to 4 calculation reports, billed at the end of the month. Details: https://structomat.com/pricing/
I am a licensed structural engineer. Can I work with Structomat?
Yes, from any country. As a partner engineer you review Structomat's analysis, design and connection package, act as engineer of record and sign it under your own licence; you set your own fee and reply to quote requests within 24 hours. You can also bring your own projects and use Structomat as your calculation back office. Join by e-mail: https://structomat.com/partner-engineers/
Where can I outsource structural steel engineering or steel detailing?
Structomat takes outsourced structural steel work by e-mail, from any country: analysis and calculation reports, connection design, 3D fabrication models, shop drawings, approval (submittal) documents and NC files, for one step or the whole chain. Engineering offices keep their own engineer as engineer of record; for everyone else, designs intended for construction are reviewed and signed by a licensed partner engineer. Every request gets a written scope and a fixed price within 24 hours, and nothing is paid before you have seen a preview of the result. Details: https://structomat.com/structural-engineering-outsourcing/
Do you sign an NDA, and who owns the files?
Yes: Structomat signs your own NDA before you share any file. Paid deliverables belong to you: PDF, DWG, IFC and native model files. Nothing is published without your written approval, and then only anonymised.
Which design codes are used?
Eurocode, AISC 360 or the code your project requires. Say which at the start, together with any national annex or local requirements.
Have a steel project?
Send drawings, photos or a model with a few lines about what you need. Small jobs are welcome.
info@structomat.com You get a written scope and price before any work starts.